Re: Re: carb ratings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: carb ratings



Chrysler used to refer to the throttle plate bore diameter for sizing.
Mike LeFevre




On Feb 15, 2012, Jimmy Peavy <peaver63@xxxxxxxxxxxxxx> wrote:

Maybe, I just can't remember.

Jimmy

On 2/15/2012 2:44 PM, Bob H wrote:
> Was it just venturi size?
>
> Flow Rates
> It depends on the size of the venturi. Refer to the info below.
>
> Venturi size CFM
> 1 3/32 278
> 1 3/16 352
> 1 1/4 381
> 1 5/16 423
> 1 3/8 435
>
>
> Keep in mind, 2 bbls and 1 bbls are rated at a 3.0 in/HG pressure
> drop an 4 bbls are rated at a 1.5 in/Hg pressure drop
>
> Bob H
>
> ----- Original Message ----- From: "Jimmy Peavy"
> <peaver63@xxxxxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxxxxxxxx>
> Sent: Wednesday, February 15, 2012 8:35 AM
> Subject: carb ratings
>
>
> They didn't use CFM ratings in the day.
> Anybody remember what they used?
>
> Jimmy
>
>
>
>
>

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.