Re: Which Trans lines in Rad are in/out?

[Eric R <hoodoovoodooray@xxxxxxxxx>]

Yeh, got that.  I mean the radiator itself.  The two ports it has in
the bottom.  As I look down at them I'm thinking driver's side would
be "in"  and passenger side would be "out".  Which would make for a
really long return line, but perhaps that's how it goes.
Thanks.

On Feb 7, 2:12 pm, "Gary H." <62to65mo...@xxxxxxxxxxx> wrote:
> If I remember right, the line in the front of the transmission (pressure) goes to the radiator and the one in the back is the return.
>
> Thanks,
> Gary H.
>
>
>
> >  -------Original Message-------
>
> >  As I'm looking down at the radiator from the front, which line is in
> >  and which is out.
>
> >  I would guess the line on my left would be "in" since it's closer, but
> >  I'm guessing.
>
> >  Same '62 Newport pushbutton if that matters.
>
> >  Trying to measure how much line to buy.  Service manual doesn't say.
>
> >  Thanks.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.