Re: sheetmetal????

[Ruth Gordon <kpmvn4wrd@xxxxxxxxx>]

I hear ya! I'm exploring the same issue for my 64 Polara. I have to shop as I am on a budget. I did go through an ordeal with my floor pans in buying from a "cheap" source - didn't fit and didn't have correct drain holes, ribs and brackets, plus was bare metal - I returned it!!  Be careful when reading what models it will fit, as Coronet stuff didn't work as I was told by the company!!! I also got inner splash shields and went through same drill but was smarter there! Look for OEM correct stuff and ask if it is painted and what thickness and if it has all ribs, brackets and holes as per factory. Double check that Coronet rear qtrs will fit Polara. After my strife I learned that Kramer auto DOES have oem correct stuff and I got splashshields from them and was very happy with quality and price. If you can find stuff cheaper sometimes shipping is high and Kramer doesn't up charge on shipping either. There is no photo on their site for rear qtrs but I think all that is available from any sourceon qtr's  is bare metal and made in Canada. Floor stuff they have is very nice and real quality and painted if I recall. Hope this helps. Maybe call them, ask for measurements and maybe even a photo. Their phone is 724 285 5566. Ruth                                                                                                                                                                                                                                                                           Jan 25, 2012 at 8:24 PM,  <dcdriver@xxxxxxx> wrote:

Guys,I'm getting ready to order the sheetmetal pieces I need for my 63 Polara 500.  I need the front floor section, and the rear quarter patch panels. Any preferrable places to order these from????  I've found a couple places on-line for the pieces but I'm curious as to what would be the BEST place to order from. I found the rear quarter sections for TWO diff prices,one place wants about $55 ea and the other is about $114 ea. I'm after quality for these parts more than price.I would appreciate your opinions guys on this.BTW for what its worth im located in Topeka Kansas,

 

Thanks in advance

 Jim

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.