David that is the exact fastener I used on my 65 Belvedere. I got then from Joe Suchy and they worked great. Michael Phelps Sent from my iPhone Thank you Ruth and all,
I will buy the Pillar Seals from Steele as they are the same price in catalog as on Ebay. Also, I found some trim clips from Fasteners Plus that might work. Picture below of clip as well as attached file showing painted car where trim goes. While not original, it looks like they can be made to fit by breaking off the scored tabs for length, and grinding down the stud on the top. I will talk to my Tony the painter and see what he says.
Thanks to everyone for all their help. I should get the glass back in this next week and then start on the interior.
I appreciate everyone's help. I would be pulling what little hair out I have, if not for all the knowledgeable and kind help I have received.
I need to figure out how to make my snap fish file public so all can see it.
Dade City David
![]()
On Sat, Dec 3, 2011 at 3:44 AM, Ruth Gordon <kpmvn4wrd@xxxxxxxxx> wrote:
Right now on ebay steele rubber has your door pillar seals # 70 2347 79 for $52.60 a pair and FREE shipping. Steele makes quality products and these do have the brass core. I need some too! That was the best deal I saw after shopping online. Some I've seen are $80 - $100 for the same thing! Hope this helps. Ruth
This is picture and email I sent to Kramer. Does anyone know the correct names of what I am looking for?
If yes, I have not had any luck finding the trim clips in the photo.
Thank you for any help or advise.
David
Dade City
Kramer,
Are These what you refer to as Latch Pillar seals?
Part pictured below on left side is R hand part = Original has part number
2167198 with KF16 below the number
Part pictured below on right side is L hand part = Original has part number
2167199 with KF13 below the part number.
I need one pair L & R for 1964 Dodge Polara.
Please advise if you have or who may have these parts.
Please see picture ( attached download)
Also looking for side trim plastic trim clips in picture and bullet tip
with hex retainer metal per black item in center of photo.
Thanks for your help.
David
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
<12-2-11 Chrome back on 005.JPG>
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
|
Back to the Home of the Forward Look Network