Re: Torker II vs Performer RPM Intake
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Torker II vs Performer RPM Intake



Fyi Edelbrock has a good tech support
And can give you out of the box flow numbers. To compare. Personally. Get a holly street dominator or weiand 7512 and have joe Lemire. Also on this website do a port and polish. I have run a couple of intakes he has done and they do make a differance he used to have a flow bench so he knows exactly which ones flow the best . Thats just my experience. With those style intakes
Sent from my Motorola ATRIX™ 4G on AT&T


-----Original message-----
From: Donald Gallimore <dongallimore@xxxxxxx>
To:
"1962to1965mopars@xxxxxxxxxxxxxxxx" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent:
Thu, Nov 24, 2011 11:48:46 GMT+00:00
Subject:
Torker II vs Performer RPM Intake

Was reading on another forum and the engine builder on the site said the
got more power out of the Performer RPM.  This is in my 440 powered '65
Belvedere. I have the Torker II and race the car a lot.

Anyone have any facts to support one over the other? SIngle plane would be my
likely choice.
 
Akron Don Gallimore

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.