Re: Oil pick-up tube
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Oil pick-up tube



I thank you for the info, but the pan is not the problem to replace, the problem I am running into is that I need a 1/2 inch pick up tube to fit a stock depth pan,  I think I have it covered, I contacted Crossram Connection as per Gary's advise, and it sounds like they have one for a stock 66 hemi that they think should work, they are suppose to get back to me in the AM to confirm,,,,,,,
 
In a message dated 10/31/2011 10:22:36 P.M. Central Daylight Time, kpmvn4wrd@xxxxxxxxx writes:
Check pan's out here.I got a 971 for my 76 440 engine I have in 64 Polara that fit nicely - close but worked. Local Dodge dealer gave 20% discount if there is a business name used! Ruth 

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.