Re: Will this Dampner Fit a 361?

[Eric R <hoodoovoodooray@xxxxxxxxx>]

>From googleing, I think it will as there is no external weight.  From
what I understand these guys are wrong to say it will work with the
cast cranks.

On Oct 20, 2:14 pm, Eric R <hoodoovoodoo...@xxxxxxxxx> wrote:
> Yes, idle and disconnected. Years ago on my 440 I had simular problem
> and it turned out the dampner had slipped.
>
> On Oct 20, 1:15 pm, Dodger7...@xxxxxxx wrote:
>
>
>
> > I am assuming that you checked it with the vacume advance disconnected, and
> >  at idle?
>
> > In a message dated 10/20/2011 11:42:53 A.M. Central Daylight Time,  
>
> > hoodoovoodoo...@xxxxxxxxx writes:
>
> > I think  mine is slipping- Hide quoted text -
>
> - Show quoted text -

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.