From: Gary H. <62to65mopar@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Monday, October 10, 2011 11:19 AM
Subject: Re: How do I get the front cylinders out?
Sounds like the Chrysler has the "Total Contact Brakes" style?
http://66.154.44.164/forum/attachment.php?s=d1fe55a14eb8a862c13f050a3ec397e7&attachmentid=108246&d=1122753315
Thanks,
Gary H.
> -------Original
Message-------
>
> Not sure if I understand you (upper and lower?), but brake cylinders are
> held on with two amall bolts from the back side of the backing plate. Does
> that help?
>
>
> Dave
>
> FROM: Eric R
>
> I need to replce the upper and lower. I took of the drum and four
> bolts, but the metal plate in the center of all the brake hardware
> still holds the cylinders. How do I remove that plate, I don't see
> any obvious way?
> Thanks.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your
privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.