From: MO <micher@xxxxxxxxxxxxxxx>
To: The 1962 to 1965 Mopar Mail List Clubhouse
<1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Thursday, October 6, 2011 4:34 PM
Subject: Re: Ring and Pinion for a 741 rear
If you don't need positraction, you can buy a complete 741 or
probably 742 differential cheaper than overhauling
yours......................MO
On Oct 6, 2:45 pm, dick shoup <
sho...@xxxxxxxxx> wrote:
> I got bad news today on the rear end I was having rebuilt. The ring gear has teeth that are flaking so I need a set of gears. It is a 741 case and i'm looking for a set of 3:55's or 3:23's. Does any one have a good used set or can direct me to a vendor for a new set? Your help is appreciated.
>
> Dick Shoup
> 62 Dodge dart 330 with a 413
> 62 Plymouth Fury with a 318
> 65 Dodge A100 with a 340
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.