From: Gary H. <62to65mopar@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Mon, September 26, 2011 8:36:19 AM
Subject: Re: Leaf Springs
FWIW, a Challenger and Cuda restoration guide claimed leaf springs were usually painted semi-gloss black although
some were an unpainted finish. Paint the springs stainless steel paint to duplicate the unpainted look. I don't know if 1964 manufacturing plants used this same technique though.
http://newstalgiamotors.com/images-content/cars/1964Plymouth/15.jpg shows a supposedly mostly unrestored 1964 Plymouth, with Dana installed. Black paint is visible.
You may want to check with ESPO about the anti-squeak material.
http://www.springsnthings.com/
Let us know what you
find out.
Thanks,
Gary H.
> -------Original Message-------
> Are the 1964 Savoy 426 street wedge leaf springs painted or are they
> bare metal and does anyone make the anti-squeak material ?
>
>
> Thanks Frank
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are
subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.