From: Gary H. <62to65mopar@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Monday, August 29, 2011 10:20 AM
Subject: Re: '64 Dodge 361/383 exhaust manifold question
These may not be too hard to find. Anyone who put headers on their motor may have the old log manifolds stored in their parts treasure trove. :)
Also, the early '60s factory exhaust manifolds are not the best for performance, so folks have also
replaced them with the later Hi-po BB stock manifolds and may have saved the old manifolds.
Thanks,
Gary H.
> -------Original Message-------
> the correct casting #s you are looking for are,,,, left, 2203091 ,,,,
> right, 2205905 ,,,,, I am fairly sure that there are others that will
> work, but would not be correct
>
>
> In a message dated 8/28/2011 10:51:41 P.M. Central Daylight Time,
> writes:
> OK thanks I better get to parts hunting
>
>
> --------------------
> From:
> To:
1962to1965mopars@xxxxxxxxxxxxxxxx> Subject: Re: '64 Dodge 361/383 exhaust manifold question
> Date: Sun, 28
Aug 2011 14:58:56 -0500
>
>
> the correct exh manifolds have the dumps for both sides at rear
> and are unique to 62 65 b body big block
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
Back to the Home of the Forward Look Network