|
Thanks for the info all, I should have looked into this years ago because when we were having troubles with the rear end in my son's wagon after the 383 was swapped in, we replaced it with the axle assy from the Polara, it seemed the logical choice since the Polara was a 383 car. If we had thought of or had knowledge of the gearing we could have used the rear end from the parts car. Too late to try to retrieve Polara rear end back because I am hauling the wagon to my Dad's shop in California in a few weeks.
-- I installed the '65 rear end in the '64 Polara to keep it a "roller" also seemed logical choice if I ever made the '64 into a hot rod. Now I am working on the car again I want it more original, but lower gears probably not a big deal, and will help at stop light take offs. The wagon's rear end was installed in the '65 to keep it a roller and it went with that car. Then again, the Polara is going to have hub caps....will the '64 center section fit the '65 rear end? Date: Sun, 28 Aug 2011 15:01:16 -0500 From: peaver63@xxxxxxxxxxxxxx To: 1962to1965mopars@xxxxxxxxxxxxxxxx Subject: Re: '64 Dodge rear axle question The 65 rear is worth nothing, and I'd be glad to stop by and pick it up. :-) Normally, but not always, a small block and a /6, are geared lower than a big block, simply because they don't make as much torque as a big block. The ring gear should be marked on both. On 8/28/2011 2:27 PM, Ben Morgan wrote:
-- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. |
Back to the Home of the Forward Look Network