Re: Playing with an idea
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Playing with an idea



No lie there, I'd love cubic money, just not cubic mm but cubic feet. Beggars can't be choosers 

Sent from my iPhone

On Aug 25, 2011, at 8:22 PM, rll <rlipinski3@xxxxxxx> wrote:

> I would do a 400 block stroker
> 
> still looks like a 383 but power/torque of a 440
> 
> Don Dumladge's(sp) book on the 400 is a good starting point.
> 
> Only thing better than cubic inches is cubic money.
> 
> rob/ferts/phx
> 65 sat
> 
> 
> 
> On Aug 24, 4:04 pm, Jacob Fox <imfast...@xxxxxxxxx> wrote:
>>>> Thinking about getting another 383 block. An building/rebuilding it outside of my car so I can still drive what I have and take my time. Never messed with Mopar motors so a couple questions:
>>>> 
>>>> 1) would it be more expensive/cheaper to rebuild a 383 than other big blocks? (I wanna 383 to keep car original but not necessary)
>>>> 
>>>> 2) are 383 parts and rebuild kits hard to come by?
>>>> 
>>>> 3) any special knowledge needed for a Mopar versus another motor? Not tryin to go crazy with horsepower or run drags. Just cruise around town on highway and sound decent.
>>>> 
>>>> 4) does anyone know someone/where I can get one cheap? Maybe someone has one rebuilt already that would save me time :-)
>>>> 
>>>> I kindve wanna backup motor so I can pull mine out when it fails put other in and build another one...
>>>> 
>>>> Sent from my iPhone
>>> 
> 
> -- 
> --
> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> -- 
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.