4 speed info needed

Does anyone have an original part # for the 64 shifter box? If not,possibly the interchange number? MIne is not the shifter that should be in the car and need to get a correct one.

Thanks in advance.

George

From: Gary H. <62to65mopar@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Tuesday, August 23, 2011 1:32 PM
Subject: Re: Valve cover refurb questions

The poly was not the red like the LA motor red. Its a red - orange blend. Chrysler Industrial Red (DE 1632) Engine Enamel by Dupli-Color is called red, but dries to a red-orange color that is close to the original Poly paint. An exact match is claimed by some to be NAPA farm equipment spray paint, International-Harvester red by Martin-Semour paints.
The Ditzler code is 71034 for acrylic enamel for the polyhead.

Thanks,
Gary H.

> -------Original Message-------
> From: Jim Altemose

>
> Regarding paint, is it turquoise or red? I've seen both but more of
> the red for sure. I'm not sure which was original and why.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.