Thank You,,,,, I think that it is great that the computer gurus will take the time to do the search for the computer challenged people like myself,,,,,In a message dated 8/16/2011 8:01:52 A.M. Central Daylight Time, a440plus6@xxxxxxxxx writes:Rock Auto1 -Manual Steering Gear Pitman Shaft Seal-TIMKEN Part # 352560 Shaft Size: 1.125"; Housing Bore: 1.561"; Seal Width: 0.25"; Seal Outside Dia: 1.567"; Seal Lip Material: Nitrile; Housing Material: Steel; Max Temp: 225°F; Min Temp: -40°F; Seal Type: 350; Press Fit- $3.96
On Tue, Aug 16, 2011 at 6:59 AM, Mike & Deb <lefevre@xxxxxxxxxx> wrote:
Dennis,
Did you try Steer and Gear?
Mike LeFevre
On 8/16/2011 1:19 AM, Dennis C. wrote:
Hello,
I am looking for the oil seal for the pitman shaft of the manual box
on my 63 Sport Fury.
So far I have not found anything online and my local dealer does not
have anything on older cars. I have been to Motion Industries and San
Diego Seal, they took measurements of the seal and the steering box
and asked it it was metric? I told them I realy doubted it by it
could be a one-off seal design just for Mopar.
So far nothing has been found yet.
If anyone has had luck finding this seal I would appreciate the source
and part number if possible.
Thanks
Dennis C.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
Back to the Home of the Forward Look Network