Re: Opinion on ignition
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Opinion on ignition



Cool.  Just be sure whatever you do, save and label the old parts.
Think hard about doing anything you can't put back the way it was.
And take lots of pictures before you start unbolting and unplugging
things.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco

On Thu, Jul 7, 2011 at 4:11 PM, Jacob Fox <imfast101@xxxxxxxxx> wrote:
> Thanks! I've built a 81 el camino before. But I was all about performance and just replaced everything...I never had anything pre 80s so a lot of this is new to me. I never messed with points and 2 barrel carbs...just always dropped the 4 barrel holleys! But I'm only 22, and going fast and everything is fun and all...but I've got to were I like original things, stuff breaks less that way too LOL. I always rush things, trying to do everything at once, I'm a plant operator doing shift work so I get a LOT of time off, this leads to boredom an looking for things to replace. The car runs amazing right now and drives even better..I'm just impatient!
>
> But to get off my soap box...thanks for all the info! Ima take my time and do it right! Just gotta remind myself.
>
> Sent from my iPhone
>
> On Jul 7, 2011, at 2:55 PM, Jim Altemose <jaltemoose@xxxxxxxxx> wrote:
>
>> Hi Jacob,
>>
>> Maybe I'm wrong, but I get the sense you may be a little new to the
>> old car scene.  How long have you had your car?  Have you had other
>> old cars before?
>>
>> Speaking from my own experience, I'm nowhere near as good and
>> experienced as the majority of guys in this group.  I'm 47 and have
>> owned several 60's and 70's muscle cars over the last 10 years, but
>> not much before that other than my rusty 70 Bel Air 4 door that I got
>> for $250 in 1982 and my friends called the Blues Mobile.  But over
>> those 10 years, I've learned a lot but enough to know I have way more
>> to still learn.
>>
>> Anyway, maybe I'm off base, but it's easy to get excited and want to
>> do everything to a newly acquired car at once.  But my best advice
>> would be that if runs and drives, use it for quite a while as it us.
>> Upgrade what's necessary to keep it running but take your time and
>> learn the car and everything you can about the model and year.  Read
>> this forum, go to car shows and talk to people.  Like a woman, you
>> have to understand what makes her tick and how you both can be most
>> comfortable with each other.  It's easy to start doing new things and
>> do too much and regret it later.
>>
>> On the other hand, you also learn by trying new things.  OK, I'm
>> stepping off the soap box and heading to Carlisle.
>>
>> - Jim
>> Jim Altemose, Long Island, NY
>> '63 Polara 500 (Max Wedge)
>> '63 Polara 500 (383)
>> '65 Belvedere I (Street Wedge)
>> '71 Bronco
>>
>> On Thu, Jul 7, 2011 at 3:28 PM, Jacob Fox <imfast101@xxxxxxxxx> wrote:
>>> Nice! Thanks for all the info! Ima hit that seal in the winter...unfortunately the only junk yards here have newer vehicles. Is there anything besides petronix or however it's spelled that y'all would recommend?
>>>
>>> Sent from my iPhone
>>>
>>> On Jul 6, 2011, at 11:32 PM, Gary Wilson <gwwilson70@xxxxxxxxx> wrote:
>>>
>>>> It is just getting broke in.  110k is just not the many miles for a
>>>> Mopar if it has been taken care of and oil changed regular/  I would
>>>> change to the mopar electric ignition. You can buy the kit or make
>>>> your own if you have access to a wrecking yard that has some 70s
>>>> mopars. Just need the dist, brain box and the plug in for the brain
>>>> box. The rear main is not to bad to change. Drop the pan and pull the
>>>> rear main cap and then use a chinees wire set up to pull and replace.
>>>> May has to help it by turning the crank a little to get it moving.  No
>>>> valve adjust ment on the 383.  Hyd  lifters and came.
>>>>
>>>> On Wed, Jul 6, 2011 at 10:26 AM, Jacob Fox <imfast101@xxxxxxxxx> wrote:
>>>>> So, I was wondering if y'all think it would be better to keep my motor original and keep the points etc, or switch distributor out of a new electronic. Also how would I go about doing that?
>>>>>
>>>>> On a slightly unrelated topic, how hard are the rear main seals to change on the 383? I got a little droplet after running my car, slightly annoying, but on Chevys they weren't that bad with a two piece..just sucks changing them. I gotta take valve covers off soon and put new gaskets cause of leak and I'ma repaint while off. Does anyone know how to adjust valves? I'm thinking no one has never touched the motor and it's got 110k on it...if I had the money and knowledge for a rebuild I'd love to...
>>>>>
>>>>> But anyways, while it's running so well and not smoking at all I thought I'd keep it up...is there anyway to tell from the outside whether a motor has been rebuilt before?? The guy I got it from just had it for a short time and didn't know...figured 110k is kindve a lot of a old mopar motor like that...any help would be great!
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Sent from my iPhone
>>>>> --
>>>>> --
>>>>> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>>>>>
>>>>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>>>>> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>>>>> --
>>>>> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>>>>> http://groups.google.com/group/1962to1965mopars?hl=en.
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Gwwilson
>>>>
>>>> --
>>>> --
>>>> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>>>>
>>>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>>>> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>>>> --
>>>> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>>>> http://groups.google.com/group/1962to1965mopars?hl=en.
>>>
>>> --
>>> --
>>> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>>>
>>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>>> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>>> --
>>> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>>> http://groups.google.com/group/1962to1965mopars?hl=en.
>>
>> --
>> --
>> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>>
>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>> --
>> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
>> http://groups.google.com/group/1962to1965mopars?hl=en.
>
> --
> --
> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
>

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.