Call Clay Kossuth 636-257-4669 he is the most likely person to have one or probably knows were to get a clock. Tell him Herb from O'Fallon, MO. sent you.
Herb
1956 Plymouth Belvedere 361 4-Sale
1959 Coronet 326 Poly
1961 Belvedere Custom Suburban Wagon 318 Poly
1962 Dodge Dart 225 Slant Six 4-Sale
1963 Fury 2D/HT 6.1L
1963 Sport Fury Convertible 361
1970 Chrysler 300 Hurst 440
1979 Dodge Aspen R/T Sport Wagon 360
1999 Durango SLT 5.9L
2008 SRT-8 Magnum 6.1L
St. Louis, MO.
-------Original Message-------
Date: 6/29/2011 5:40:56 PM
Subject: 64 plymouth fury clock
hi all
thanks to all for the information on the hood hinges
if any body has a 64 plymouth fury clock that works and would like to sell it ---- or knows some one that recondition them---
please email me at
jcheek@xxxxxxxxxxxxx
thanks jack
From: "Jacob Fox" <imfast101@xxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Sunday, June 26, 2011 9:20:46 PM
Subject: Re: hot starting & fuel?
For sure I'ma check that out and get back with y'all
Sent from my iPhone
Then the choke and fast-idle cam that works with the electric choke are probably where the problem lies.
Chick
----- Original Message -----
Sent: Sunday, June 26, 2011 8:54 PM
Subject: Re: hot starting & fuel?
okay how do you make subfolders etc? im new to gmail. i think we are talking about two different things...the cam hes talking about is actually on the carb, not the fuel pump. ima check out the choke thing first and see if that fixes it before i make a shield for the fuel pump.
On Sun, Jun 26, 2011 at 7:25 PM, Stephen Andrachek <s.andrachek@xxxxxxxxxxx> wrote:
What pic in what service manual? That's a clue for us to exploit.
First, it could be a cable or part of a set up to make your inside air hot in the winter or cool in the summer. Then it would be part of it on the outside and the inside of the dash. This will probably already be answered by the time you get it. Then just see the black and bold line at the bottom and if you know what to do just delete this and all other emails if you found your answer just make some sub-folders in email with a main folder, 1962 to 1965 Q and A. and subfolders under that for reference. Or one of many other ways. Access Gary's web site via your cell phone. I'm lucky enough to get by but many others struggle. Jacob seems like he could hook something like that up forhimself if he wants but to me it is like reinventing the wheel since its already been done. I probably beating a dead horse below. But anyone alrealy knowinging it doesn't have to read it and should always check out Gary's site before doing anything anyway.
Lot's of stuff can run off one kind of cam or another. The fuel pump runs off a cam. There is one bolt there that you need a special wrench to get to or have a new fuel pump put on by someone with that special wrench (usually homemade) so all bolts are tight on the fuel pump. It can be disabled with plate held on by two little bolts. If not, the mechanical pump goes on right there. That pump contains I think three and maybe four bolts holding it in. Even if the person who got it out couldn't get it back in, he could have just left it out, causing the other bolts to loosen and cause problems. With an electric fuel pump and a pressure regulator, you don't need no steenin' fuel pump and you can take it out and plug up the hole(s). I think the plate covers it all.
Coming out of the side of the block is a rod made out of metal about 3/8"or so thidk with a spring behind it. This may be close to the fuel pump or part of the reassembly when you put a new one on. Here's where you can put in a heavier spring in for more oil pressure on a 413 and up Mopar block. Some used to put a flat washer behind the cap-screw on that held it together and make the spring stronger that way.
Gary's site has a lot more stuff on it, but you are narrowing down the problem and it could still be lots of things. On top of the other things
----- Original Message -----
Sent: Sunday, June 26, 2011 5:28 PM
Subject: Re: hot starting & fuel?
is there anyway to disable the cam till i get a chance to get something else? i noticed it was stuck the other day after comparing my carb to a pic in the service manual. i noticed something was different so i fiddled with it and click it went where it should. its so hot down here all the time i dont really need it right now, maybe when it gets cold in december-january.
On Sun, Jun 26, 2011 at 4:23 PM, Stephen Andrachek <s.andrachek@xxxxxxxxxxx> wrote:
Get a carb like it rebuilt by someone who knows what they are doing or get a new carb that hooks up to your linkage ok. That sounds like a good place to start. The "fast idle" cam seems to be stuck. This cam keeps the engine at fast idle until it warms up enough. Blocked heat risers may cause this, but I would guess only in colder weather and only until the engine warmed up.
Remember the old gas and the fuel tank and fuel filters too.
Chick
----- Original Message -----
Sent: Sunday, June 26, 2011 5:19 PM
Subject: Re: hot starting & fuel?
i just checked out those links...ill def be making one of those! one thing i noticed though starting my car yesterday. i noticed that my carb has no electric choke. when i crank it no matter hot or cold i believe the choke is activating. I noticed by the high idle and when i give it rpm a little while after starting it goes back down. any ideas to check and see if thats my problem? i never messed with any carb other than a electric eldelbrock 4barrel, so this old 2barrel is new to me. Thanks!
-- --
-- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en.
-- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en.
-- -- Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en.
|
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
|
Back to the Home of the Forward Look Network