Re: T-bar install refresher course

[<62to65mopar@xxxxxxxxxxx>]

Rules? Don't use vice grips or anything that will scratch the t-bar when R&R. There are ID marks on the t-bar that tells about it.
http://www.moparmusclemagazine.com/techarticles/suspension/mopp_9910_torsion_bar_restoration_and_detailing/identification_chart.html has an ID chart. 
I think the FSM has pictures.

Drag racers often use \6 t-bars though.

Thanks,
Gary H.


>  -------Original Message------- 
>  
>  I am gonna replace the t-bars in the 62 dart before I drop the new 440
>  in there. Reason is, i believe they might be the original slant 6
>  bars. The guy that installed the V8 K member might have just stuck the
>  old slant 6 bars back in. They look pretty skinny, and they have a red
>  hash mark on them.
>     I have a larger pair from a 64 Polara, but they have just been
>  lying on the shelf for years. I cant remeber what the rules are about
>  installing T-bars ( right/left, front/back)
>    Thanky
>    Neal Zimmerman, Eugene Oregon 

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.