RE: Intake Manifold

["Nico Over" <nover@xxxxxxxx>]

I recommend you also join the 318 Poly group over at Yahoo groups: 
http://autos.groups.yahoo.com/group/318poly/
There are many of us here that also belong to that group. There are 2 single 
four barrel intakes on Ebay at this time going from 300-350.00USD, there also 
is a dual quad intake for sale there. As Bill mentioned there was a 
supercharger kit available from Dick Landy but is no longer avaialble since 
his death but have heard they may be starting up again. Hope this helps.
Nico Over
Va. Beach, Va


On Thu, 23 Jun 2011 16:20:11 +0000, Bill Paxton wrote
> A few years back I saw an article and as I recall there was a 
> supercharger setup for the poly. One of the big mopar racers, seems 
> like it was Landy but am not sure.
> 
> -----Original Message-----
> From: 1962to1965mopars@xxxxxxxxxxxxxxxx 
> [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Stephen Andrachek
> Sent: Thursday, June 23, 2011 12:17 PM
> To: 1962to1965mopars@xxxxxxxxxxxxxxxx
> Subject: Re: Intake Manifold
> 
> Do a web search on the 318 Poly engine.  Some have already built up 
> some with ported heads and made their own intakes and things like 
> that.  Sadly, there never was much speed equipment available for 
> that engine.  Now you can get some pistons, a cam, new valve springs,
>  have the heads ported as best as possible, even stroke the engine 
> and some guys are over 400 HP with their 318 Polys.  They are good 
> engines but it takes a lot of ingenuity  to get them to go REAL 
> good.  They are easier to do at a medium level.
> 
> Anyway, I'll have a look around the web and see what I can find and 
> forward anything I find to you.
> 
> Welcome aboard and you did just fine.  Glad to have you and I'm sure 
> everyone else is too.
> 
> Stephen "Chick" Andrachek
> 
> ----- Original Message ----- 
> From: "mabendaspoor" <deltamin@xxxxxxxxxxx>
> To: "The 1962 to 1965 Mopar Mail List Clubhouse" 
> <1962to1965mopars@xxxxxxxxxxxxxxxx>
> Sent: Thursday, June 23, 2011 4:32 AM
> Subject: Intake Manifold
> 
> >I hope this is the correct forum for this question!
> > I'm looking for an inlet manifold for a 318A poly engine fitted into a
> > Dodge 330. It appears that this is a scarce item yet when I searched
> > the website of 'Car Parts Wholesale' they came up with an Edelbrock
> > 7576 intake manifold as being a suitable fit. I then went to Amazon
> > and that website also confirmed its' suitability. As I live in South
> > Africa I cannot afford to import such a unit and find it to be
> > incorrect. Should it be a good fit, what carburettor is recommended?
> > (I want to polish the ports, perhaps put in a mild cam and insert
> > valve seats for unleaded petrol). As this is my first forum posting
> > please forgive any breach of protocol.
> >
> > -- 
> > You received this message because you are subscribed to the Google Groups 
> > "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> > To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
> > To unsubscribe from this group, send email to 
> > 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> > For more options, visit this group at 
> > http://groups.google.com/group/1962to1965mopars?hl=en.
> >
> >
> 
> -- 
> You received this message because you are subscribed to the Google 
> Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To post 
> to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx To 
> unsubscribe from this group, send email to 
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit this group at 
http://groups.google.com/group/1962to1965mopars?hl=en.
> 
> -- 
> You received this message because you are subscribed to the Google 
> Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To post 
> to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx To 
> unsubscribe from this group, send email to 
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit this group at 
http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.