Darwin/Victoria,BC Canada '65 Cdn. Valiant Custom 100'vert...**SOLD** '67 Dart GT 'vert - 273/904 http://s41.photobucket.com/albums/e285/65val/----- Original Message ----- From: "William Harrison" <bbjt3@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxxxxxxxx> Sent: Thursday, June 16, 2011 1:33 PM Subject: Re: Fw: 440 head questionThe passage that is blocked off is at an exhaust valve. What it does is warm the intake quickly to help idle. Blocking it off does not harm the engine in any way. You will just have to keep goosing it until it warms enough to idle. Again.....Unless you are installing larger valves and porting and polishing there is really no reason to block them off.
Later Bill --- On Thu, 6/16/11, MO <micher@xxxxxxxxxxxxxxx> wrote:
From: MO <micher@xxxxxxxxxxxxxxx> Subject: Re: Fw: 440 head questionTo: "The 1962 to 1965 Mopar Mail List Clubhouse" <1962to1965mopars@xxxxxxxxxxxxxxxx>Date: Thursday, June 16, 2011, 4:25 PM Thanks folks for the replys, but I am still a little befuddled, I know the port that goes accross the intake, under the carb can be blocked off with an intake gasket, What I am concered with is the big semi-circle holes arounf that port. in the head. looks like he** and a trap for dirt and small parts. Are those also covered by the aftermarket intake gasket?? To Chick: are you saying that instead of the stock type valley cover/ intakje gasket combo, that there is available a seperate valley cover and seperate intake gaskets? . Thanks...........MO On Jun 16, 11:53 am, "Stephen Andrachek" <s.andrac...@xxxxxxxxxxx> wrote: > My friend MO, > > You are exactly right. You can block off the heat passage from the heads > to the intake by using the correct valley cover. You can get the valley > cover > from Hughes Engineering (Google them up) and very good intake gaskets off > of them too with a bead of silicon built in around each port. > > To take things a little farther, if you put an Edelbrock Air Gap intake on > your car with a low-restriction air cleaner you will pick up a noticable > amount of torque and HP. But your engine is going to be a little > cold-blooded and will need a little warm up time that with the heat > passages blocked off. > > Mancini's is also a great place to do business with. Both companies are > all > Mopar, all the time and will answer questions over the phone for you, > unlike > Indy Cylinder Head which does not want to talk to their customers at all. > They consider that annoying and will refuse to answer your questions. > > Hope this helps you in some way. > > Stephen "Chick" Andrachek > > > > > > > ----- Original Message ----- > > From: "MO" <mic...@xxxxxxxxxxxxxxx> > > To: "The 1962 to 1965 Mopar Mail List Clubhouse" > > <1962to1965mopars@xxxxxxxxxxxxxxxx> > > Sent: Thursday, June 16, 2011 2:21 AM > > Subject: 440 head question > > >> This is for a 1978 head.Intake side -1/2 way between the intake > >> ports. where the heat crossover port is. What does the semi-circle > >> pocket in the casting intended to do. And what can be done to hide > >> it? I would be using valley cover with blocked off heat port. Thanks > >> for any help......................MO > > >> -- > >> You received this message because you are subscribed to the Google Groups > >> "The 1962 to 1965 Mopar Mail List Clubhouse" group.> >> To post to this group, send email to > >> 1962to1965mopars@xxxxxxxxxxxxxxxxx> >> To unsubscribe from this group, send email to > >> 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx > >> For more options, visit this group at > >>http://groups.google.com/group/1962to1965mopars?hl=en.- Hide quoted text - > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxxFor more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
--You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxxTo unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
-- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.