i would say leave it alone and let it dry ,,,i should be ok ,,, --- On Sat, 6/11/11, neal zimmerman <neal.zimmerman@xxxxxxxxx> wrote: > From: neal zimmerman <neal.zimmerman@xxxxxxxxx> > Subject: pb blaster on wiring harness > To: 1962to1965mopars@xxxxxxxxxxxxxxxx > Date: Saturday, June 11, 2011, 7:15 PM > OK, I was trying to get an underdash > wiring harness out of a parts > car. I don't think it had ever been removed in 45 years, so > the > connectors were tight and unyielding. I was afraid I was > going to > break them, so I had no choice but to douse each connector > with a good > shot of PB Blaster. It worked, it came out lickety-split, > but now I > have an oily harness that will smell up the car when I > install it. So > NOW I need to remove all that PB blaster. What can I use > that wont > hurt the plastic wirings or connectors?? I know many things > that will > cut the PB blaster, but I am afraid it will hurt the > harness. Its a > really nice harness too and I dont want to damage it in any > way > neal zimmerman, eugene oregon > > -- > You received this message because you are subscribed to the > Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" > group. > To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx > To unsubscribe from this group, send email to > 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx > For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en. > > -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.