Did he mean the "run" or "start" side of the ballast resister? Blue wire is typically run, brown is typically start. Thanks. Gary H. > -------Original Message------- > > Thanks guy's for the suggestions. > > I spoke with Pertronix today. The tech told me that if I wanted to > keep the ballast resistor, all that I would need to do is run the red > wire from the Ignitor to the ignition side of the ballast resistor. He > said that by doing that the system would still function with the > ballast resistor. > > Next question, what side of the resistor is the ignition on looking at > the firewall? Can everyone tell that I don't wrench too much? > > Thanks, > Ted > 65 Dodge Coronet 500 -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.