Cory, I just went to the NAPA online site and looked up lower ball joints for a 71 Chrysler 300. They show them with the arm attached as being available as part #’s RPC 10166 right and RPC 10167 left. Not cheap however, $114.00 each. I just checked for your 65 Polara and they show the same part numbers but….. they also show another set for your car. RPC 10490 right and RPC 10491 left. And those are “gulp” $482.46 each. Dan From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Cory Rempel Ok here's my dilemma. I can't seem to find ANYBODY who makes lower ball joints for C-bodies 65 and newer. I would like to do the front end in my 65 Polara. And my buddy has been looking for years for a set for his 71 300. I thought he was kidding when he said he couldn't find any. When I did some research into it I found out he was right. I then checked for my car, just in case, and found out the same thing. I then did some more poking around and found that all C-bodies 65 and newer magically no longer have lower ball joints. Either that or all existing ball joints on these cars have suddenly become indestructible an thus there is no further need make them. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en. |
Back to the Home of the Forward Look Network