The 3.91s will get rid of the noise, but you will notice the same thing
when you go from park to drive,,,,a new TC will solve your problem, but if this
is mainly a street car, do not get to carried away with the stall or you will be
just as unhappy with the final results,,,,,
In a message dated 5/29/2011 6:20:43 P.M. Central Daylight Time,
shelby_nut@xxxxxxxxx writes:
This may be the missing piece of the puzzle anyhow, the 383 makes
good power once the cam comes in, but is a dog off the line (I'm sure
the wifes minivan will take it off the lights, at least until I get to
2000rpms..). Once the revs are up it pulls hard, chirps second and
goes. There are 3.55 in the back right now but they whine bad so I just
picked up a case with 3.91's in it, that'll help but I think I should
give a call to Dynamic...
Thanks for all the input!
Jay
--- On Sun, 5/29/11, Jimmy Peavy
<peaver63@xxxxxxxxxxxxxx> wrote:
From:
Jimmy Peavy <peaver63@xxxxxxxxxxxxxx> Subject: Re: Torque
Converter To: 1962to1965mopars@xxxxxxxxxxxxxxxx Received:
Sunday, May 29, 2011, 6:56 PM
Dynamic will make just about any convertor that
you want. And yes, they can make it for the the early splined input
shaft. But you will pay more for that option.
Jimmy On 5/29/2011 3:46 PM, Jay wrote:
Let's try again....
My 64 Windsor (Newport) Convertible
originally came with a 361. At sometime in it's life the 361
was replaced with a 1966 383 2bbl engine. Then a weiand 4bbl
intake, Holley 750, and headers were added, as well as a
cam.
I don't know the specification of the cam,
but it is fairly lumpy, in that it has that nice lumpy cam
tone out the exhaust when in gear. I have to set the idle at
around 1000rpm's, so that in gear it doesn't stall
out.
Question is this, when I put it in gear from park, it
engages hard and pulls the rpm's down to around 700. Would
this hard engagement and large drop in rpms be possible due to
some sort of tranny modification (shift kit, line pressure or
spring change) or is it more a function of the torque
converter?
Once again, any insight would be appreciated!
Jay
| -- You received this
message because you are subscribed to the Google Groups "The 1962 to
1965 Mopar Mail List Clubhouse" group. To post to this group,
send email to 1962to1965mopars@xxxxxxxxxxxxxxxx. To
unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. For
more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
-- You received this message because you are subscribed
to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse"
group. To post to this group, send email to
1962to1965mopars@xxxxxxxxxxxxxxxxx To unsubscribe from this group,
send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For
more options, visit this group at
http://groups.google.com/group/1962to1965mopars?hl=en.
|
-- You received this message because you are subscribed to the
Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To post
to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx To
unsubscribe from this group, send email to
1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit this
group at
http://groups.google.com/group/1962to1965mopars?hl=en.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
|