Paul\ I have a valve body with a shift kit with less than 2 miles on it. I am looking for a reverse pattern valve body myself. If you are interested in a swap let me know. Thanks Bill Harrison 65 Coronet 2 dr post. --- On Mon, 4/25/11, Gary H. <62to65mopar@xxxxxxxxxxx> wrote: > From: Gary H. <62to65mopar@xxxxxxxxxxx> > Subject: RE: Trans valve body > To: 1962to1965mopars@xxxxxxxxxx > Date: Monday, April 25, 2011, 9:39 PM > > Hum. Maybe give Pat Blais Transmissions a call and see what > he suggests. > His phone number is on the 62-65 Vendor's Web Page. > > Thanks, > Gary H. > > Paul Lennemann wrote: > > > > Hey Fellas, > > I'm going to be pulling my transmission to get the > missing 2nd gear > > repaired. While it's out I'd like to replace the > reverse pattern, > > manual shift valve body the previous owner > installed. I want an > > automatic shift valve body but wouldn't mind enhanced > shifting > > performance. And most of all I want to get rid > of the reverse shift > > pattern as it doesn't make sense for a push button > shift. > > I've done a little searching on the internet for some > options but > > haven't found anything for our cable shift > transmissions. Any > > recommendations? > > > > Paul L. > > '63 Sport Fury > > 440/727 > > http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html > > > ---- > Please address private mail -- mail of interest to only one > person -- directly to that person. I.e., send > parts/car transactions and negotiations as well as other > personal messages only to the intended recipient, not to the > Clubhouse public address. This practice will protect your > privacy, reduce the total volume of mail and fine tune the > content signal to Mopar topic. Thanks! > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html and > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. > > >