Jim if they're the same I have the complete front 10" brakes from a 66 Belvedere II that I converted to disc brakes including the drums and hubs. Dan -----Original Message----- From: Jim Altemose [mailto:jaltemoose@xxxxxxxxx] Sent: Monday, April 25, 2011 8:03 PM To: 1962to1965mopars@xxxxxxxxxx Subject: Re: Front hubs / studs? Nick, Thanks for the info. The NAPA drums are P/N: ND 4401056 https://www.napaonline.com/Catalog/CatalogItemDetail.aspx?A=NDA4401056_0325240437&An=599001+101963+50020+2020032+25003&Ar=AND%28P_RecType%3aA%29 It sounds like a set of old used cast iron drums are the way to go. I'll have to wait another week to talk to Craig. He's off to the Spring Carlisle show. I also just want to clarify something for myself. The stock studs can NOT be pressed off, true? They're 'swaged' and you need a special cutting tool. You'll ruin the hub by pressing, true? Thanks again. - Jim Jim Altemose, Long Island, NY '63 Polara 500 (Max Wedge) '63 Polara 500 (383) '65 Belvedere I (Street Wedge) '71 Bronco ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.