Re: Help: molding clip and retainer locations

[Mike Phelps <mikeph@xxxxxxxxxxxxx>]

I think the center one holds the leading edge of the wide moulding. It looks like the one for the body side moulding on my Belvedere. 

Michael Phelps
Sent from my iPhone

On Apr 20, 2011, at 11:00 PM, Wayne Huseby <wchuseby@xxxxxxxxxx> wrote:

> 
> Gary suggested I post pictures of the clips in question for my 64 polara 
> hardtop. here is the link below.
> 
> http://www.picupine.com/ca0a82cx
> album is named 64 dodge polara clips
> Any help as to where these go would be appreciated. 2 of each of the 
> large one and 2 each of the small one go on the side trim somewhere. No 
> idea where the small rectangular one goes, there are 4 of those.
> 
> 
> Gary H. wrote:
>> 
>> 
>> I know the feeling of  putting something in a "safe" place -- so safe 
>> that even I can't find it when I need it! 
>> 
>> I don't have the answer. I suggest you post a picture of each of the 
>> clips that you can't identify where they go. A picture is worth many 
>> words, and helps "jog" a memory.
>> 
>> Topica won't transmit the pictures. You can use any of the free photo 
>> hosting sites. www.picupine.com is particularly easy for quick picture 
>> sharing. You upload the pictures and share the link address. 
>> 
>> Thanks,
>> Gary H.  
>> 
>> 
>> 
>> Wayne Huseby wrote:
>>> 
>>> Do any 64 polara 2 dr hardtop owners out there have diagrams or photos 
>>> showing where all of the plastic clips, metals clips and other 
>>> miscellaneous sheet metal clips and retainers go on the narrow and wide 
>>> moulding on the side of the car. I took photos when taking them off but 
>>> I’ll be darned if I can find them now when I need them.
>>> 
>>> I did talk to Joe Suchy and he was a big help with the plastic and 
>>> spring loaded clips but there are some others I don’t know where they 
>>> go.
>>> 
>>> Any help would be greatly appreciated.
>>> 
>>> Thanks in advance.
>>> 
>>> 
>>> Wayne Huseby
>>> 64 polara 500
> 
> 
> 
> Wayne Huseby
> 64 polara 500
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
>