Re: guage refurbishing.

[Mike Phelps <mikeph@xxxxxxxxxxxxx>]

I used a soldering iron to melt the plastic attachment points and used it again to melt it back together. Worked great. 

Michael Phelps
Sent from my iPhone

On Apr 21, 2011, at 7:06 AM, Mike & Deb <lefevre@xxxxxxxxxx> wrote:

> 
> Hi Steve,
> Funny you should pose this question, yesterday I took my license plate lamp lenses from paint oversprayed to clear with wet sanding followed by two step Novus plastic polishing. They turned out quite nice. It takes some elbow grease. I believe the only way to separate the cluster is to drill/ grind off the melted pegs and glue back together. Good luck!
> Mike LeFevre
> 
> 
> 
> 
> 
> 
> 
> 
> On 4/21/2011 12:01 AM, MO ( Steve Mick) wrote:
>> 
>> Has anyone had success with removing  all the fine scratches from the clear plastic cover over the speedometer and guages? Also the radio dial.  That plastic face is attached to the rest of the assembly with melted plastic studs. Anyone have a way of getting it off? Thanks for any input....................MO
>> {Steve Mick}
>> http://stevemick1964dodge.shutterfly.com/pictures/5
>> 
>> ----
>> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>> 
>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
>> 
>> 
>> 
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to19> 
>