Re: Carter AFB replacement?

[Jim Altemose <jaltemoose@xxxxxxxxx>]

FYI, RockAuto has the Carter P60504 for $45.79 and if you click "more
info", they have an installation video and documentation.

http://www.rockauto.com/catalog/moreinfo.php?pk=296280

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco

On Fri, Apr 8, 2011 at 11:33 AM, Jim Altemose <jaltemoose@xxxxxxxxx> wrote:
> This in-line Carter pump looks like what the doctor ordered.  Is there
> any advantage to running it full duty?  Will it have any performance
> benefit in conjunction with the mechanical pump?  If not, it seems
> like switching it off would extend it's life.
>
> - Jim
> Jim Altemose, Long Island, NY
> '63 Polara 500 (Max Wedge)
> '63 Polara 500 (383)
> '65 Belvedere I (Street Wedge)
> '71 Bronco
>
> On Fri, Apr 8, 2011 at 8:50 AM, Dennis C. <dennis.2914@xxxxxxxxx> wrote:
>>
>> Rich,
>>
>> What do you think of this one?
>>
>> http://www.amazon.com/Carter-P60504-Electric-Fuel-Pump/dp/B000BZX92K
>>
>> It sure sounds like what you are talking about and at $54.00 not a bad
>> price.
>>
>> What really sounds good is the good flow-through that would allow it to
>> be used on a switch along with the stock pump.  The 4 psi is not enough
>> to cause any problems but will keep a positive pressure on the fuel line
>> that will reduce if not eliminate the possibility of vapor lock.  It
>> will solve the dry starting problem.
>>
>> I am going to try one.  I have the CRT-P4070 on my 383.  I even put it
>> on isolators and it gets attention when the pump starts, with the
>> exhaust the noise is not a problem but on my poly with stock exhaust the
>> pump on Amazon sounds like a nice pump.
>>
>> Thanks
>> Dennis
>>
>>
>> Rich Kinsley wrote:
>>>
>>> I believe it would be the pump in the Summit catalog # CRT-P4070  for
>>> $76.  I had gone to NAPA and inquired and they came up with a Carter
>>> number for me which was probably the same one. I did the race Holley
>>> pump 'cause I got it complete with regulator for $50 and only used for a
>>>
>>> dyno pull. It's a tad noisy but I like the sound :-)
>>>
>>> This Carter is the right pressure at 6psi and is one I will use if mine
>>> takes a dump.
>>>
>>> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>>>
>>> ====================================================================
>>> 65 wrote:
>>> >
>>> > ""There is a preferred Carter in line fuel pump that is a flow thru
>>> > design
>>> > that you can use in conjunction with your mech pump.""
>>> >
>>> > Rich...do you happen to have a part number for this pump?
>>> >
>>> >
>>> > Darwin/Victoria,BC Canada
>>> > '65 Cdn. Valiant Custom 100'vert...**SOLD**
>>> > '67 Dart GT 'vert - 273/904
>>> >  http://s41.photobucket.com/albums/e285/65val/
>>> >
>>> >
>>> >
>>> > ----- Original Message -----
>>> > From: "Rich Kinsley" <rlkinsley@xxxxxxxxx>
>>> > To: <1962to1965mopars@xxxxxxxxxx>
>>> > Sent: Thursday, April 07, 2011 4:56 PM
>>> > Subject: RE: Carter AFB replacement?
>>> >
>>> >
>>> > >
>>> > > I swapped out my mech fuel pump for a Holley Blue race pump. Now that's
>>> > > a bit overkill but it certainly works. You must use a pressure regulator
>>> > > and set it no more than 6.5psi for an Edelbrock. The manual that comes
>>> > > with the Eddy specs 6.5psi as max. I run 5.5 to 6psi myself. I know for
>>> > > a fact that too much pressure will even bend the floats all to heck.
>>> > > Been there, done that :-(
>>> > >
>>> > > There is a preferred Carter in line fuel pump that is a flow thru design
>>> > > that you can use in conjunction with your mech pump. Many people put it
>>> > > on a seperate switch so it can be turned on at start up or conditions
>>> > > that are causing vapor lock. Electric pumps are usually required to be
>>> > > near the gas tank and as high as possible. I only run the Holley pump
>>> > > but I also have it on a switch to control it. That's kinda handy. It
>>> > > acts like an anti-theft device too.
>>> > >
>>> > > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>>> > >
>>> > >
>>> > > =====================================================================
>>> > > Cory Rempel wrote:
>>> > >>
>>> > >>
>>> > >>
>>> > >> Hey Tom,
>>> > >>
>>> > >> You said you had an electric fuel pump instead of the mechanical.  Could
>>> > >> you tell us more about it?  What brand, how much presure, where you
>>> > >> installed it on your car, etc.  Also wiring it, how you did it?  Thanx
>>> > >> Cory
>>> > >>
>>> > >> 65 Polara   440/727
>>> > >>
>>> > >>
>>> > >> > To: 1962to1965mopars@xxxxxxxxxx
>>> > >> > From: tomwatters@xxxxxxxxxxx
>>> > >> > Subject: Re: Carter AFB replacement?
>>> > >> > Date: Thu, 7 Apr 2011 11:29:00 -0700
>>> > >> >
>>> > >> > Eastwood makes a spray-on carb paint that you can 'cover' the shiny
>>> > >> > with
>>> > >> >
>>> > >> > aluminum color if you wish.
>>> > >> >
>>> > >> > As for the hard starting, My AFB has similar evap issue, but its
>>> > >> > usually
>>> > >> >
>>> > >> > crank it for 30 seconds on startup if its been sitting a few days, 3 to
>>> > >> > 5 pumps of the gas petal, and it fires right up. My son's volare is
>>> > >> > more like a 90 second crank prior to bowl filling up.
>>> > >> >
>>> > >> > I know an electric fuel pump vs the Mechanical Carter Fuel Pump I have
>>> > >> > would be the solution. Turn on Key, float bowls fill up, ready to
>>> > >> > start.
>>> > >> >
>>> > >> > Modern replacement will still have evap issues. Holleys less so,
>>> > >> > because bowls are bigger. I had a Holley Street Avenger 770 on a 440
>>> > >> > that ran like a monster. Was very impressed with the carb right out of
>>> > >> > the box. Ran 14.05 in a 4000 lb car in Denver prior to dialing the carb
>>> > >> > in.
>>> > >> >
>>> > >> > --Tom
>>> > >> >
>>> > >> > On 4/7/2011 8:16 AM, Rich Kinsley wrote:
>>> > >> > > Steve, I don't think they come in that 'dull' finish. They have the
>>> > >> > > bright and the super bright :-) How about painting it with the
>>> > >> > > stainless steel paint I used on the head display and my hood scoop?
>>> > >> > > That
>>> > >> > > paint is super expensive, $22 a can, but it is the best ever and goes
>>> > >> > > a
>>> > >> > > long way. It is used on outdoor transformers, etc, by the utility
>>> > >> > > companies. I don't think we can just get the stuff but I have a
>>> > >> > > contact
>>> > >> > > I can get it from. Legally !!! I have a little bit left in the can I
>>> > >> > > used.
>>> > >> > >
>>> > >> > > BTW your 331 hemi-head will be back on April 20th along with my car.
>>> > >> > >
>>> > >> > > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>>> > >> > > ======================================================================
>>> > >> > > Steve Mick wrote:
>>> > >> > >> Can you get a new Edlebrock carb that is not shiney-(natural finish)
>>> > >> > >> ?.........................MO
>>> > >> > >> {Steve Mick}
>>> > >> > >> http://stevemick1964dodge.shutterfly.com/pictures/5
>>> > >> > >> ----- Original Message -----
>>> > >> > >> From: "Don"<d4owe9@xxxxxxxxxxx>
>>> > >> > >> To: "Mopar Discussion Group"<1962to1965mopars@xxxxxxxxxx>
>>> > >> > >> Sent: Wednesday, April 06, 2011 12:20 PM
>>> > >> > >> Subject: RE: Carter AFB replacement?
>>> > >> > >>
>>> > >> > >>
>>> > >> > >>>
>>> > >> > >>>
>>> > >> > >>> Jim: Good choice on the Edelbrock. They are very simple, start
>>> > >> > >>> better
>>> > >> > >>> than
>>> > >> > >>> Holleys or Carters. Don
>>> > >> > >>>
>>> > >> > >>>> To: 1962to1965mopars@xxxxxxxxxx
>>> > >> > >>>> From: jaltemoose@xxxxxxxxx
>>> > >> > >>>> Subject: Carter AFB replacement?
>>> > >> > >>>> Date: Wed, 6 Apr 2011 12:05:03 -0400
>>> > >> > >>>>
>>> > >> > >>>>
>>> > >> > >>>> I currently have a rebuilt 1965 Carter AFB 4 barrel on my 63
>>> > >> > >>>> Polara
>>> > >> > >>>> 500 with a 383. I like being close to period correct but I'm
>>> > >> > >>>> getting
>>> > >> > >>>> tired of the starting difficulties. If the car has been sitting
>>> > >> > >>>> for a
>>> > >> > >>>> week, it takes a while of turning the starter to start up. We've
>>> > >> > >>>> had
>>> > >> > >>>> discussion on the board before and I think the consensus was the
>>> > >> > >>>> old
>>> > >> > >>>> Carter AFB's were prone to evaporation and it takes some cranking
>>> > >> > >>>> to
>>> > >> > >>>> refuel it. FYI, I have the standard stock style mechanical fuel
>>> > >> > >>>> pump.
>>> > >> > >>>>
>>> > >> > >>>> I'm thinking strongly about replacing it with a modern 4 barrel.
>>> > >> > >>>> Any
>>> > >> > >>>> opinions on a good compromise between driveability and a little
>>> > >> > >>>> power?
>>> > >> > >>>> I was thinking Edelbrock Performer 600 CFM.
>>> > >> > >>>>
>>> > >> > >>>> I currently have the old style choke with the thermostat sitting
>>> > >> > >>>> in
>>> > >> > >>>> the recess on the intake manifold. Any opinions on getting a new
>>> > >> > >>>> carb
>>> > >> > >>>> with electric vs. manual choke? Pros and Cons?
>>> > >> > >>>>
>>> > >> > >>>> As always, thanks.
>>> > >> > >>>>
>>> > >> > >>>> - Jim
>>> > >> > >>>> Jim Altemose, Long Island, NY
>>> > >> > >>>> '63 Polara 500 (Max Wedge)
>>> > >> > >>>> '63 Polara 500 (383)
>>> > >> > >>>> '65 Belvedere I (Street Wedge)
>>> > >> > >>>> '71 Bronco
>>> > >> > >>>>
>>> > >> > >>>>
>>> > >> > >>>> ----
>>> > >> > >>>> Please address private mail -- mail of interest to only one
>>> > >> > >>>> person --
>>> > >> > >>>> directly to that person. I.e., send parts/car transactions and
>>> > >> > >>>> negotiations as well as other personal messages only to the
>>> > >> > >>>> intended
>>> > >> > >>>> recipient, not to the Clubhouse public address. This practice will
>>> > >> > >>>> protect your privacy, reduce the total volume of mail and fine
>>> > >> > >>>> tune the
>>> > >> > >>>> content signal to Mopar topic. Thanks!
>>> > >> > >>>>
>>> > >> > >>>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>>> > >> > >>>> http://www.1962to1965mopar.ornocar.org/mletiq.html and
>>> > >> > >>>> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>>> > >> > >>>>
>>> > >> > >>> --
>>> > >> > >>> [Non-text portions of this message have been removed]
>>> > >> > >>>
>>> > >> > >>>
>>> > >> > >>> ----
>>> > >> > >>> Please address private mail -- mail of interest to only one
>>> > >> > >>> person --
>>> > >> > >>> directly to that person. I.e., send parts/car transactions and
>>> > >> > >>> negotiations as well as other personal messages only to the
>>> > >> > >>> intended
>>> > >> > >>> recipient, not to the Clubhouse public address. This practice will
>>> > >> > >>> protect
>>> > >> > >>> your privacy, reduce the total volume of mail and fine tune the
>>> > >> > >>> content
>>> > >> > >>> signal to Mopar topic. Thanks!
>>> > >> > >>>
>>> > >> > >>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>>> > >> > >>> http://www.1962to1965mopar.ornocar.org/mletiq.html and
>>> > >> > >>> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>>> > >> > >>>
>>> > >> > >>>
>>> > >> > >>>
>>> > >> > >
>>> > >> > >
>>> > >> > > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>>> > >> > > http://1962to1965mopar.ornocar.org/ml-kinsley64polara.html
>>> > >> > >
>>> > >> > >
>>> > >> > > ----
>>> > >> > > Please address private mail -- mail of interest to only one person --
>>> > >> > > directly to that person. I.e., send parts/car transactions and
>>> > >> > > negotiations as well as other personal messages only to the intended
>>> > >> > > recipient, not to the Clubhouse public address. This practice will
>>> > >> > > protect your privacy, reduce the total volume of mail and fine tune
>>> > >> > > the
>>> > >> > > content signal to Mopar topic. Thanks!
>>> > >> > >
>>> > >> > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>>> > >> > > http://www.1962to1965mopar.ornocar.org/mletiq.html and
>>> > >> > > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>>> > >> > >
>>> > >> >
>>> > >> >
>>> > >> > --
>>> > >> > -- 65 Dart GT Convertible 4bbl 4spd
>>> > >> > -- North Las Vegas, NV
>>> > >> >
>>> > >>
>>> > >> --
>>> > >> [Non-text portions of this message have been removed]
>>> > >>
>>> > >
>>> > >
>>> > >
>>> > > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>>> > > http://1962to1965mopar.ornocar.org/ml-kinsley64polara.html
>>> > >
>>> > >
>>> > > ----
>>> > > Please address private mail -- mail of interest to only one person --
>>> > > directly to that person.  I.e., send parts/car transactions and
>>> > > negotiations as well as other personal messages only to the intended
>>> > > recipient, not to the Clubhouse public address. This practice will
>>> > > protect
>>> > > your privacy, reduce the total volume of mail and fine tune the content
>>> > > signal to Mopar topic.  Thanks!
>>> > >
>>> > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>>> > > http://www.1962to1965mopar.ornocar.org/mletiq.html and
>>> > > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>>> > >
>>> >
>>>
>>>
>>>
>>> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>>> http://1962to1965mopar.ornocar.org/ml-kinsley64polara.html
>>
>>
>>
>> 1996 Dodge Ram 3500 Van Conversion
>> 1964 Plymouth Belvedere 318 Auto
>> 1963 Plymouth Sport Fury 383 4-speed
>> 1949 Dodge Pickup 289/C4 soon to be changed
>> 1998 Honda Valkyrie Standard
>>
>>
>> ----
>> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>>
>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>>
>>
>