Re: Button connectors

[William Spore <w.spore@xxxxxxxxxxxxx>]

If its what Im thinking it is a female spade connector will work and is very close to the original connector. Does the connector just slide on over the button part of the sending unit? If so the female spade connector will work. Should be able to get them at your local parts store. Bill

----- Original Message -----
From: Mike Phelps <mikeph@xxxxxxxxxxxxx>
Date: Tuesday, March 29, 2011 10:39
Subject: Button connectors
To: 1962to1965mopars@xxxxxxxxxx

> 
> Anyone know where the "button" style electrical connectors that 
> snap on 
> the oil and temp sending units can be found?
> 
> Mike Phelps
> 1965 Plymouth Belvedere II Convertible
> 361/727
> 2004 Hemi Ram Quad Cab
> 2004 Chrysler 300M 3.5HO
> 2004 PT Cruiser 2.4 Turbo
> 
> 
> ----
> Please address private mail -- mail of interest to only one 
> person -- directly to that person.  I.e., send parts/car 
> transactions and negotiations as well as other personal messages 
> only to the intended recipient, not to the Clubhouse public 
> address. This practice will protect your privacy, reduce the 
> total volume of mail and fine tune the content signal to Mopar 
> topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
> --
> 
> 

--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.