Re: Speedo Cable Leak (Housing)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Speedo Cable Leak (Housing)




never know  until you try,,,,,, would at least give it a try, cheaper  than 
a new cable,,,,, and nothing lost if it fails,,,
 
 
In a message dated 3/30/2011 2:47:23 P.M. Central Daylight Time,  
tomwatters@xxxxxxxxxxx writes:

Speedo  Cable Leak (Housing)
I've been having this phantom leak on my 4 speed since  I got the car 
going again.

The other day I Found out it is the  speedometer cable. Its leaking from 
around the inside of the crimp on the  cable side.

Can I solder this crimp to seal it? Anyone ever done this?  Or do I have 
to replace the full speedometer cable housing?

-- 65  Dart GT Convertible 4bbl 4spd
-- North Las Vegas,  NV



--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.