Re: painting vintage license plates
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: painting vintage license plates




Armed with knowledge is a GREAT thing !!! See what happens when we all pool experience As us Southern Boys say "Got the T-Shirt"
Ollie

-----Original Message----- From: William Harrison
Sent: Thursday, March 17, 2011 2:44 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: painting vintage license plates

Fellow 62 to 65 guys....
I can't count the number of times that I have done the krylon enamel paint and then sprayed with krylon clear coat and had the paint blister. Doh!!! Thanks for enlightening me about that problem, just never figured out that enamel and lacquer were incompatible. I'll never let my wife about this as my "smartability" will take a big hit..
Later
Bill Harrison
65 Coronet 2 dr post

--- On Thu, 3/17/11, Dan McCormack <mcwheels@xxxxxxxxxxxxxx> wrote:

From: Dan McCormack <mcwheels@xxxxxxxxxxxxxx>
Subject: RE: painting vintage license plates
To: 1962to1965mopars@xxxxxxxxxx
Date: Thursday, March 17, 2011, 10:46 AM

Thanks Jim, I can always use a good laugh and I'm always
glad to find out there's other people besides me that have
these trial and error disasters. Third time is a charm isn't
always true is it. LOL

First let me say that yes we are allowed in NY to register
a vintage car with Year of Manufacture plates but..... They
have to be a matched pair (if 2 plates were used in that
year) of original unrestored plates. They are not allowed to
be repainted. That being said my story starts with me buying
a pair of 1936 NY plates for my 36 Plymouth at Hershey for
$45.00. After I got home I had a friend of mine who's a
police dispatcher run the number. (I get by with a little
help from my friends) He found out that the number was
already in use on a 69 Chevy owned by some 85 year old woman
I so couldn't use them. Damn old lady probably's had the
number since 1936. LOL Anyway I found another matched set on
eBay that were much better condition than the first set. I
had my friend run the number before I bid on them this time
and got them for $14.00.

Here's what I did:
1. Cleaned dirt off plates and took picture to send to DMV
in Albany. (before repainting)

2. Used fine steel wool to scuff up old paint and remove
small rust spots.

3. Wiped off plates with lacquer thinner.

4. Sprayed plates with Rustoleum Satin Black and let dry.

5. Gave plates to a friend of mine who's a sign painter.
(Again I get by with a little help from my friends)

6. He painted the letters back on with a brush and one shot
yellow paint. (the same paint used by pinstripers)

7. Got plates back in 2 weeks. (Can't rush a friend who's
doing you a favor for nothing) The plates look totally
original.

Two things in closing, Krylon clear coat is a lacquer based
product so that's why it ate up the Krylon enamel. (been
there done that LOL)

Also I've since found out that if you want to check if a
number is in use (at least in NY) and you don't have a
police dispatcher friend you can go the NY DMV website.
There is place on the website where you can type in a number
for a vanity plate to see if it's available. It won't tell
you who has the number but it will tell you if that number
is in use or not.

Dan,
NY  36
8D 90-23




-----Original Message-----
From: Jim Altemose [mailto:jaltemoose@xxxxxxxxx]

Sent: Wednesday, March 16, 2011 1:56 PM
To: 1962to1965mopars
Subject: OT: painting vintage license plates


Hopefully this isn't too off-topic.  I'm sure some of
you may try to
restore vintage license plates for your car.  Maybe
this can save you
some trouble.  In NY I'd guess it's the same as much
of the country in
that you can register a real vintage plate if it's the
correct year
for the car and not in current use.

There's guys on the Web you can find to do it for about $75
per plate,
which may well be worth it.  I'm too stubborn and
ignorant to think I
can't do everything myself.  It took my dumb a$$ five
tries to get it
right, but they finally came out real nice.

Here's what worked:
1. Paint remover to take off majority of paint.
Blasting cabinet for the rest.

2. Sprayed base-coat primer using white Rustoleum metal
primer.

3. Sprayed letter color 12 coats with Krylon
Indoor/Outdoor.  Why
Krylon?  They had the right color.

4. Sprayed 12 coats of Rustoleum Clear Enamel to thicken
and protect
layer.  Why?  KRYLON CLEAR COAT RUINS KRYLON
PAINT.  More on that
later.

5. Sprayed 4 coats (or enough to cover) of Krylon
Indoor/Outdoor
background color.

6. Very gently sanded off letters and edge with 900 grit
emory.  Used
a tiny square with my finger tip.  Took about 1/2 hour
per letter.
Touched up where necessary.

7. Sprayed 12 coats of Rustoleum Clear Enamel to finish.

I'm very pleased with the final results.


In case you want to learn from my mistakes, here's what
didn't work.

1. Similar sanding method as above, but with a block.
Letters weren't
as uniform height as you'd think.  Got to metal
quickly.  Strip it
again, start over.

2. Spray on background.  Roll on letters with a small
detail roller.
Impossible to get full coverage without splatter and
without getting
down edges of letters.  Strip it, start over.

3. Spray on background.  Hand paint with a fine
brush.  You better be
Bob F'n Ross.  Very hard to not get edges.  Don't
sneeze, burp or
fart.  Start over.

4. Back to sanding method.  Sprayed on Krylon letter
color.  Then
sprayed on Krylon Clear Coat.  Gee, you'd think it
would say somewhere
on the can they're incompatible.  Paint got sticky and
bubbled up in
spots like it was paint remover.  Boy that one put me
in a bad mood.

Hit on the correct combo of Rustoleum and Krylon after
trial and error
on scrap plates.  It all sticks real good.

I never tried masking tape or vaseline; they might have
been next.


A word about color selection.  I couldn't find the
right letter color
in any stores, so had to go on line.  Rustoleum didn't
have anything
close.  Krylon had a whole bunch, but they were 1/4
inch sample
swatches.  I'm handy with computers and Photoshop, so
I brought into
Photoshop jpg images from the Web of the license
plates.  Then I was
able to select a Photoshop pen with the same color from the
swatches.
I could then paint right over the letters on the plates and
compare
the colors.  Worked well for me.

Anyway, that's my story.  I hope I can save someone
some of the hours
I lost drinking beer and listening to music and watching
paint dry.
Actually, I guess it wasn't so bad.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco


----
Please address private mail -- mail of interest to only one
person -- directly to that person.  I.e., send
parts/car transactions and negotiations as well as other
personal messages only to the intended recipient, not to the
Clubhouse public address. This practice will protect your
privacy, reduce the total volume of mail and fine tune the
content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.







----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.











Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.