Re: alignment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: alignment




I believe this to be the correct specs.
 
camber left,,,,,+1/2 degree
             right,,,,,,,+1/4
 
caster,,,,,,,+1/2 degree
 
toe,, 1/8
 
 
In a message dated 3/7/2011 8:35:01 A.M. Central Standard Time,  
mopargrandad@xxxxxxxxx writes:

I have  installed the "Moog problem solver" upper a arm bushings in order 
to get  
more positive caster. I am also now running radial tires in place of the  
bias 
tires. Any recomendations for front end alignment specs? The '65  Coronet 
is a 
big block manual steering car which is used on the street  only.
Get America back to work.
Buy American.
Hire American.  




--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.