Re: Too weird: now compression tester stuck?

[Gary Wilson <Gwwilson67@xxxxxxxxx>]

I still like the screw in type.  Mine has the adpaters for short reach or long 
reach.  I just unscrew from the adapter then remove the adapter.  Never had very 
good luck with the hold em in type.  


----- Original Message ----
From: Gary H. <spigot2039@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Wed, February 23, 2011 7:37:41 PM
Subject: RE: Too weird: now compression tester stuck?




I like that design Rich. The screw in types are a PITA to use on a V8 with 
limited access to the plug holes. What brand is the one you have?

Thanks,
Gary H.



-----Original Message----- 
>The tester I have just inserts in the plug hole and seals itself by 
>expansion. It does not screw in at all. You have to hold it securely to 
>get it started or it pops out but it works good and is very easy. It 
>does take two guys or a remote starter at least.
>
>Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies 


----
Please address private mail -- mail of interest to only one person -- directly 
to that person.  I.e., send parts/car transactions and negotiations as well as 
other personal messages only to the intended recipient, not to the Clubhouse 
public address. This practice will protect your privacy, reduce the total volume 
of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and 
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 



      


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.