Re: Sloppy Mirror Pivot Fix

["Gary H." <spigot2039@xxxxxxxxxxx>]

Thanks, that seems easier than taking the side mirror apart to add friction. There are some other tips on how to do that on the 62-65 site's Technical Tips and Links page. I think this tip will go well there too. :) 

Thanks,
Gary H.   

-----Original Message----- 
>
>The pivot of the side view mirror on my '65 is sloppy.  This is the same manual 
>adjust mirror on many of our 62-65 cars.
>
>There is a good fix in the November, 2010 edition of Auto Restorer magazine.
>
>They used red Loctite thread sealer - you can start with blue if you are a 
>little nervous about the red Loctite.  Anyway, put some in the pivot area, work 
>the mirror around and it will tighten up.  However, it will still move after it 
>dries so you can adjust it as needed. Author claimed it lasted two years before 
>he had to do it again.  Considering that repoped mirrors are $150, it's worth a 
>try.
>
>BTW - I find this non-brand specific magazine chock full of good restoration 
>tips.  I read if cover to cover and it's a keeper for future reference. 
>Subscription is $29/year. 
> 
>Akron Don Gallimore


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER