Floor board repair

[Brian Safford <hzf9vv@xxxxxxxxx>]

Having never done any body repair, I'm not sure how to get started
with a repair on my floor boards.

I've posted a couple of pictures here:

http://picasaweb.google.com/hzf9vv/DartFloorboardRepair

Do I just cut out the rusted area?  If so, do I use a rectangular or
circular shape?  Should I use a pattern for removal so that I can use
the same pattern ( a bit larger I'd guess ) for the replacement metal?

Are there professional welder people that can come to your house to
weld in the new pieces?  I'll probably have some frame rail connectors
to weld in place as well ...

I don't want to start cutting stuff until I have some semblance of a plan ...

Thanks in advance,
Brian Safford
'62 Dart 440 / Poly 318
2010 Challenger RT / 5.7 HEMI argh argh argh argh :-)


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.