RE: 4 speed swap

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

I bet Schumacher has the trans mount adapter. They have lot's of 
conversion stuff for our cars. Maybe even our Imperial Services guy, 
Steve Charette?

Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
===================================================================== 
Scott Mirabella wrote:
> 
> Hey Guys,
> I'm in the middle of a 4 speed swap from a 64 (ball & trunion) to a 70 
> a-833 from a charger. I did have to switch the bellhousing (larger 
> bearing retainer) and I'll need a new speedo cable or adapter. But my 
> big problem is the tranny mount. The new tranny mount location seems to 
> be about an inch and a half foward of the old one. And now no longer 
> lines up with the crossmember. i know there has been discussion of this 
> swap before. Any ideas on what mount to use and where to get it? 
> Thanks alot for any help!!
> 
> Scott Mirabella
> 1964 Fury Convertible
> 383 4speed
> LongIsland, NY



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.