Re: looking for wisdom

["Gary H." <spigot2039@xxxxxxxxxxx>]

There was a discussion here not too long ago. Seems I recall one conclusion was to replace the 1965's pump and
input shaft with newer ones designed for the 360 converter. Or to buy an adapter bushing to fit the bigger 360 crank and 360 flex plate for a 727. http://www.tciauto.com/ sells them I believe. If I'm wrong someone will help out if this "wisdom" fails the test. :) 

Thanks,
Gary H. 

-----Original Message-----
 
>hi all
>i have a 360 motor and transmission that come out of a  69 charger .
>i have a 65 transmission that was behind a 65 coronet 273 motor.will the convertor out of the 69 trans.. work with the 65 transmisson also using the the 69 flex plate.wondering if there would be a balance problem.and then bolt it to the 360 motor.
>thanks all for your imput.
>thanks jack
>65 coronet 440 convertible(may a 360 motor)
>63 dodge polara 500 h.t.
>446 with a max wedge top end
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.