383 blowing? oil
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

383 blowing? oil



Having gotten my 64 Sport Fury 383 together, I've now driven it probably 700
miles. I did nothing to the motor because it seems to be very responsive,
makes no unusual noises, no exhaust smoke. Some of those miles have been
showing off of course :)  I did an oil change, added zinc, before I started
driving the car any distances or under any stress.

I'm down about a quart of oil. The car is not burning any oil, but does have
two leak sources. One is the valve covers. The other...bit of a mystery to
me. I find some oil residue on the firewall, but also find small puddles of
oil on the engine behind the carb, in the depressions on the intake
manifold. I also notice some oil smoke coming from one of the breathers on
the valve covers after driving the car for an hour or so.

Any ideas on where the oil collecting on the back of the intake manifold
would be appreciated. Thank you,

Butch/Ferndale, WA


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.