RE: Pinks All Out & Akron Don

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

My pinion snubber is at least an inch away from the floor and the next 
adjustment is actually touching the floor. I think all I can do is drill 
another hole in between the two. But then I don't have that many 
traction issues usually.

Rich Kinsley '64 Dodge Polara 4dr 318 poly w/goodies
====================================================================
Donald Gallimore wrote:
> 
> Hi, Don.  
> 
> You still working on yours or did you get rid of it?
> 
> Anyway, 60' was 1.70 to1.73.  29.5 by 9" tires at 16 psi (per my 
> questionable 
> 0-20 psi pencil gauge which will be retired with a good unit before the 
> next 
> race).
> 
> Fine tuning is the answer.  The suspension looks contrary to what I 
> expected 
> given the lift at staging and that is what bothers me.  Hmm - wonder if 
> the 
> pinion snubber is actually not hitting the floor?  Time for a system to 
> check 
> that movement.  
> 
>  
> Akron Don Gallimore
> 
> 
> 
> ----- Original Message ----
> > From: Donnie Schanz Jr <dcs426@xxxxxxxxxxxxxx>
> > To: 1962to1965mopars@xxxxxxxxxx
> > Sent: Wed, September 1, 2010 2:44:47 PM
> > Subject: Re: Pinks All Out & Akron Don
> > 
> > 
> > What is your 60' time Don? It looked like it should be about 1.7-1.6's. 
> > What  
> >tires are you running? What psi in them? If your hooking good enough to 
> >pull the  
> >front tire, running 12's, it should be a little adjustment away from a 
> >12 flat I  
> >would think. I have always loved your car.
> > 
> > Donnie
> > 
> > ----- Original  Message ----- From: "Donald Gallimore" 
> > <dongallimore@xxxxxxx>
> > To: <1962to1965mopars@xxxxxxxxxx>
> > Sent:  Tuesday, August 31, 2010 9:23 PM
> > Subject: Pinks All Out & Akron  Don
> > 
> > 
> > Ran Pinks All Out at Summit Raceway Park (Norwalk) last weekend.  This 
> > is my
> > final qualifying run on Rich's arm drop. Guy in the other lane was  a 
> > little
> > wired as he jumped the drop. Made us both back up and restage so  that 
> > they
> > could restart the R/T clocks. I beat him off the line by .300 and  then 
> > out 
> >ET'd
> > him by a mere .012 seconds. My run was a best ever 12.265 @  109.94. 60 
> > foot 
> at
> > 1.70. Very happy with my performance. Here's my  run:
> > 
> > http://www.youtube.com/watch?v=R1dq0ZqmxQE
> > 
> > After looking at  the run, I appreciate any comments and suggestions on 
> > where 
> >to
> > go to get that  last .25 seconds so I can have a sub 12 second street 
> > car.  No
> > NOS!
> > 
> > 
> > One thing I find intreging is that they tell you to set  the pinion 
> > snubber at
> > 1/2 inch off the floor for an automatic but this thing  obviously in 
> > preloaded
> > before it leaves the line. I'm hold the RPMs at 1500  on the line. Also, 
> > 
> notice
> > the two different rises on the back of the car on  the two staging 
> > attempts.
> > 
> > Thanks.
> > 
> > Akron Don Gallimore 
> > 
> > ----
> > Please address private mail -- mail of interest to only one  person -- 
> > directly 
> >to that person.  I.e., send parts/car transactions and  negotiations as 
> >well as 
> >other personal messages only to the intended recipient,  not to the 
> >Clubhouse 
> >public address. This practice will protect your privacy,  reduce the 
> >total 
> >volume of mail and fine tune the content signal to Mopar  topic.  
> >Thanks!
> > 
> > 1962 to 1965 Mopar Clubhouse Discussion  Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and  
> >http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.  
> > 
> > 
> > 



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.