RE: carb debate

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

Gosh I dunno? How much will you want me to pay you :-)

Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
======================================================================
Steve Mick wrote:
> 
> Thanks Rich, good points - the kind of discussion I was talking about. 
> As I 
> want mine to be 1960's in appearance, I don't want a shiney carb as 
> Holley 
> and Eddy  are so fond of. Before Eddy bought them out, Carter had some 
> aftermarket  AFB performance carbs (non-shiney) that I understand are 
> identical to the current Eddys and I think max size was 750 CFM. 
> Actually 
> Rich, if you do some research , there are a lot of things you can do 
> with a 
> Holley depending on which one is selected.  Howerver I believe the Eddy 
> might give a wider range of adjustments than most  any single street 
> Holley. 
> ( like 3310)  Thats why my question--I don't know.
> 
> Rich, If I do select an AFB, I need to have you tutor me on it- what 
> might 
> that cost me? :-)......................MO
> 
> {Steve Mick}
> http://stevemick.shutterfly.com/pictures#Part%202
> ----- Original Message ----- 
> From: "Rich Kinsley" <rlkinsley@xxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Wednesday, August 25, 2010 9:19 PM
> Subject: RE: carb debate
> 
> 
> >
> > Obviously I mess with my Edelbrocks constantly. Always searching for the
> > perfect set-up. I don't know much about Holley's but to me it seems as
> > if the Eddy's are more adjustable and have myriads of ways to change
> > them. They are very simple to figure out. It seems the Holley's only
> > have a few adjustments available and then you have to live with it. But
> > really it's just preference. I have a 3310 Holley that I want to tear
> > apart and practice on. If I ever get a 4bl manifold I may even try it
> > out.
> >
> > By the way, I think I have a darn good 90 degree set-up on my poly right
> > now! It's running good! Look out Geezers :-)
> >
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> > ====================================================================
> > Steve Mick wrote:
> >>
> >> Any opinions on this? ...........MO
> >> {Steve Mick}
> >> http://stevemick.shutterfly.com/pictures#Part%202
> >> ----- Original Message ----- 
> >> From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>
> >> To: <1962to1965mopars@xxxxxxxxxx>
> >> Sent: Monday, August 23, 2010 10:21 PM
> >> Subject: carb debate
> >>
> >>
> >> >
> >> > I am trying to make a decision on what carb I want to use (single 4 
> >> > bbl)
> >> >
> >> > Holley or Edelbrock AFB. Vacume or mechanical secondarys along with
> >> > other
> >> > things to consider.  I understand Holley a little more, but guys in the
> >> > know say they understand Edelbrocks better than Holley!  So I would 
> >> > like
> >> >
> >> > you-uns opinions brand choice and why.  Demon or other carbs , or
> >> > special
> >> > tuned aftermarket are not considered in this question.  413-440 4 speed
> >> > 3:55 ratio weighing 3800-4000 lbs. @ 55-6000 RPM max. Thanks for any
> >> > input..........MO
> >> >
> >> > {Steve Mick}
> >> > http://stevemick.shutterfly.com/pictures#Part%202
> >> >
> >> > ----
> >> > Please address private mail -- mail of interest to only one person --
> >> > directly to that person.  I.e., send parts/car transactions and
> >> > negotiations as well as other personal messages only to the intended
> >> > recipient, not to the Clubhouse public address. This practice will
> >> > protect
> >> > your privacy, reduce the total volume of mail and fine tune the content
> >> > signal to Mopar topic.  Thanks!
> >> >
> >> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> >> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> >> >
> >> >
> >> >
> >>
> >
> >
> >
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --  
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic.  Thanks!
> >
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> >
> > 
> 



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.