You're correct Doug. The correct version mounts under the dash. You can buy a correct one. If you want, I'll try to find the Ebay vendor I purchased from or you can call JC Auto in Lynwood. /Butch/ Ferndale, WA -----Original Message----- From: Douglas Sutherland [mailto:pluckedchickens@xxxxxxxxxxx] Sent: Thursday, August 12, 2010 9:18 PM To: 1962to1965mopars@xxxxxxxxxx Subject: Heater Hoses for '64 Sport Fury I want to replace my heater hoses but I have a switch installed on my heater inlet hose that is controlled by the heaters "pull down" lever on the dash. I think the former owner rigged this up because I've never seen this set up on another car.I'm wondering if this switch is an add-on or should be behind the dash -- not on the engine. Thanks,Doug -- [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.