RE: Hub stud part number

["Gary H." <spigot2039@xxxxxxxxxxx>]

Dorman catalogs are online also to browse.

http://www.rbinc.com/default.aspx

Thanks,
Gary H.


-----Original Message----- 
>
>
>I bought my replacement studs at NAPA.  They had a catalog with pages 
>and pages of different sizes.  This is at a NAPA store that is a 
>distribution center, so they may have more catalogs etc. than your 
>neighborhood store.  I switched to R hand threads and needed longer ones 
>to fit the Ansen wheels I bought.  Still ended up having to cut @ 1/2" 
>off of the length, that was as close as I could get off the shelf.
>
>Paul L.
>'63 Sport Fury
>440/727
>http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html
>
>Brian Safford wrote:
>> 
>> All,
>> 
>> Does anyone have a part number for a replacement 1/2" stud that will
>> press into the front hub of my 1962 Dart?
>> 
>> All the local part stores are showing 7/16" studs and I'd like to keep
>> the same lug nuts if possible.
>> 
>> Thanks in advance,
>> Brian
>> 
>> '62 Dart 440 / Poly 318
>
>
>
>Paul L.
>'63 Sport Fury
>440/727
>http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html
>
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.