Kramer----- Original Message ----- From: "Chris Romanidis" <superstock64polara@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Wednesday, July 14, 2010 7:13 PM Subject: 64 B BODY BULKHEAD CONNECTOR PROBLEM...
Hey All,I have a 64 Polara hardtop coupe with a burnt out electrical connection at the bulkhead connector on the firewall. It must be a common issue, the heavier guage positve wire from the alternator has crapped out and melted the bulkhead connector. I have temporarily fixed the issue but need to source another electrical bulkhead fitting. The two plug in connectors in the engine bay side are fine, it's the larger fitting with the female connections coming from the dash wiring that's the problem. I believe 64 & 65 bulkhead connectors are the same. Any idea where I could source one from?Chris. [Non-text portions of this message have been removed] ----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!1962 to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.