I was able to use the charger and it worked fine, There was a low hum from the charger through the speakers but other than that the test went well. Thanks all. Mike P. ----- Original Message ---- > From: Gary H. <spigot2039@xxxxxxxxxxx> > To: 1962to1965mopars@xxxxxxxxxx > Sent: Sun, July 4, 2010 8:41:16 AM > Subject: Re: Power supply > > Whatever you use make sure there is a speaker attached before you apply > power. Thanks, Gary H. -----Original Message----- >From: > chymar01 > >Instead of using a charger, I'd just use a battery. > > >----- Original Message ----- > >Just mainly > want to see that it powers up and sends a signal to the speakers. I just don't > want to fry it. >Mike ---- Please address private mail -- > mail of interest to only one person -- directly to that person. I.e., send > parts/car transactions and negotiations as well as other personal messages only > to the intended recipient, not to the Clubhouse public address. This practice > will protect your privacy, reduce the total volume of mail and fine tune the > content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse > Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and > http://www.1962to1965mopa---