trim removal help

[Wayne Huseby <wchuseby@xxxxxxxxxx>]

Well I am almost finished removing all the trim before it goes out for 
painting. So many questions but here goes.

Is it a problem to remove the Mopar emblem on the sail panel without 
touching the headliner. I have not tried accessing it thru the courtesy 
lights. Is that the way to go?

The other problem I encountered is the Polara 500 wording directly 
behind the front wheel housing. I can only see one stud with a nut on it 
to remove, easy access. How is the other end of it being held on to the 
body?

How is the trim on the top of the doors and back seat (where you rest 
your arm to look cool) attached, more trim clips?

Another interesting roadblock I came across is the black plastic emblem 
above the headlight is in a housing. To remove the housing I plan on 
drilling a hole thru the wheel well to access it with a socket on an 
extension, then plug it later with a body plug. It is either that or 
remove the fender, NO WAY. Any other thoughts from anyone.
Thanks in advance.

Wayne Huseby
64 polara 500


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.