Re: 65 Belvedere, S6 cooling issue.

[Ollie <satellite1965@xxxxxxxxxxx>]

Great....
Waiting for further reports....
Keep us posted !!
Ollie
----- Original Message ----- 
From: "Mike and Linda" <miclinmopar@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, May 24, 2010 5:11 PM
Subject: Re: 65 Belvedere, S6 cooling issue.


> OPPS....
> 5 blade fan..not a six.   its a OEM type with steel blades riveted to the 
> hub.  Looks similar to a flex fan.  I bet the blades do flex some,
>
> ----- Original Message ----- 
> From: "Mike and Linda" <miclinmopar@xxxxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Monday, May 24, 2010 6:08 PM
> Subject: Re: 65 Belvedere, S6 cooling issue.
>
>
> > Thanks all for the replies.  I went to the scrap yard to look for fixed 
> > blade fans ( 6-7 ) blade.  It turns out that virtually all the cars have 
> > clutch fans.  I then spied a couple of 70's caddies,  low a behold 18", 6 
> > blade fixed fan!   I took it of, and put it up against my mopar spacer 
> > that I brought for a hole pattern comparison.  Turns out, its lines up 
> > darn near perfectly and the center hole is correct too!.
> >
> > I say darn near....the bolt holes are 5/16, but the spacing is slightly 
> > smaller by maybe 1/64 - - or less.  It REAL close and should bolt up fine 
> > without having to open up the holes.
> >
> > I get alot of parts from the yard....so the mgr. said "its yours....see 
> > you next time!"   S C O R E ! ! !
> >
> > Now to blast, paint and swap it out.
> >
> > Mike
> >
> >
> > ----- Original Message ----- 
> > From: <mopar413@xxxxxxxxxxx>
> > To: <1962to1965mopars@xxxxxxxxxx>
> > Cc: "Mike and Linda" <miclinmopar@xxxxxxxxxxxxx>
> > Sent: Friday, May 21, 2010 11:21 PM
> > Subject: Re: 65 Belvedere, S6 cooling issue.
> >
> >
> > > I have a real nice one.   email me ant  mopar413@xxxxxxxxxxx  If 
> > > intererested email me and I will provide a ph # and price.
> > > ---- Mike and Linda <miclinmopar@xxxxxxxxxxxxx> wrote:
> > > > Anyone have a 6 blade fan kicking around??????????
> > > > Mike
> > > >
> > > >
> > > > ----- Original Message ----- 
> > > > From: "Ollie" <satellite1965@xxxxxxxxxxx>
> > > > To: <1962to1965mopars@xxxxxxxxxx>
> > > > Sent: Friday, May 21, 2010 8:38 AM
> > > > Subject: Re: 65 Belvedere, S6 cooling issue.
> > > >
> > > >
> > > > >
> > > > > Mike,
> > > > > Couple questions..are you using a after market temp gauge or just the
> > > > > original dash gauge? I would verify the temp with a good gauge....I
> > > > > remember last summer we fixed my buddies Chevy overheating problems 
> > > > > by
> > > > > trashing the cheap aftermarket gauge replacing with a autometer 
> > > > > gauge.
> > > > > Change the fan to a 6 blade...used in AC cars
> > > > > I would not think u would need a shroud on a /6 with no air.
> > > > > Radiators get price scary. You can almost get a custom built aluminum
> > > > > radiator for a copper core rebuild.
> > > > > Ollie
> > > > > ----- Original Message ----- 
> > > > > From: "Mike and Linda" <miclinmopar@xxxxxxxxxxxxx>
> > > > > To: <1962to1965mopars@xxxxxxxxxx>
> > > > > Sent: Thursday, May 20, 2010 9:36 PM
> > > > > Subject: 65 Belvedere, S6 cooling issue.
> > > > >
> > > > >
> > > > >>
> > > > >>
> > > > >> I only have a few miles on the car since buying it.  I'm just trying 
> > > > >> to
> > > > >> build up some confidence in it.  After my first 20 mile run, the 
> > > > >> eng.
> > > > >> seemed to run hot, so I replaced all the hoses, waterpump and put in 
> > > > >> a
> > > > >> new 180 deg. thermostat.  The radiator shop cleaned the radiator a 
> > > > >> fixed
> > > > >> a few leaks that popped up after cleaning, but said it fragile.
> > > > >> Currently, no leaks.  I went to install a clutchfan, but its 3' tall 
> > > > >> and
> > > > >> hits the radiator - so I had to reinstall the measly 4 blade.  No 
> > > > >> shroud
> > > > >> unfortunately....
> > > > >>
> > > > >> No one makes and aftermarket on for this year.  I don't want to pay 
> > > > >> big
> > > > >> bux for a recore either.  Is there another application that would 
> > > > >> fit?
> > > > >> One that maybe has a similar hose layout and provision for a 
> > > > >> shroud?????
> > > > >>
> > > > >> thanks
> > > > >>
> > > > >>
> > > > >> ----
> > > > >> Please address private mail -- mail of interest to only one 
> > > > >> person --
> > > > >> directly to that person.  I.e., send parts/car transactions and
> > > > >> negotiations as well as other personal messages only to the intended
> > > > >> recipient, not to the Clubhouse public address. This practice will
> > > > >> protect your privacy, reduce the total volume of mail and fine tune 
> > > > >> the
> > > > >> content signal to Mopar topic.  Thanks!
> > > > >>
> > > > >> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > > > >> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> > > > >>
> > > > >>
> > > > >>
> > > > >
> > > > >
> > > > > ----
> > > > > Please address private mail -- mail of interest to only one person --
> > > > > directly to that person.  I.e., send parts/car transactions and
> > > > > negotiations as well as other personal messages only to the intended
> > > > > recipient, not to the Clubhouse public address. This practice will 
> > > > > protect
> > > > > your privacy, reduce the total volume of mail and fine tune the 
> > > > > content
> > > > > signal to Mopar topic.  Thanks!
> > > > >
> > > > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > > > > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > ----
> > > > Please address private mail -- mail of interest to only one person --  
> > > > directly to that person.  I.e., send parts/car transactions and 
> > > > negotiations as well as other personal messages only to the intended 
> > > > recipient, not to the Clubhouse public address. This practice will 
> > > > protect your privacy, reduce the total volume of mail and fine tune the 
> > > > content signal to Mopar topic.  Thanks!
> > > >
> > > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > > > http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> > > > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --  
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect your privacy, reduce the total volume of mail and fine tune the 
> > content signal to Mopar topic.  Thanks!
> >
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.