I'm pretty sure that the hardtop and convert are the same. I know about the sedan vent seal not work since I had a sedan given to me and I went to a lot of trouble to get the seal out of both sides only to find that the seal was too tall. Boy was I upset. I then checked the parts manual and it showed different part numbers for the sedan and hardtop. I did not have the convert at the time and do not remember if the hardtop and convert are a match but I think so. Someon with access to a part book would know right away. K. K. Bill M wrote: > > Is a convertible the same as a hardtop or sedan? or is it a breed onto > itse= > lf? > > Bill M > > On Wed, Apr 21, 2010 at 1:14 PM, Butch Edison <waedison@xxxxxxxxxxx> > wrote: > > > > Thanks for that Kevin. I did not suspect there would be any difference. > > /= > Butch/Ferndale, WA > > > > ----- Original Message ----- > > From: "Kevin Merkley" <krmerkley@xxxxxxxxx> > > To: 1962to1965mopars@xxxxxxxxxx > > Sent: Wednesday, April 21, 2010 10:00:40 AM GMT -08:00 US/Canada Pacific > > Subject: RE: New Vent Window Seal for Dodge & Plymouth Post Models > > > > > > Does anyone knnow if they are making the hardtop units? =C2=A0The roof > > is > > about 1/2" lower on a hardtop and the sedan seals do not work. > > > > K. Kevin R. Merkley Thunder Bay, Ontario 64 Dodge 440 2dr HT (Cdn) 64 Dodge Polara 500 Convertible (Cdn) ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.