Re: wheels wanted

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

Thanks all for your responces, Again I learned from the good folks on this 
mai-list.  In using 8 inch wide rims which are actually closer to 9" rim 
edge to rim edge. I may be cutting things to close for my fenderwell 
clearance.  Most of the recommendations for the tire size I want to use 
calls for the 8" I am thinking cheater slicks or stickey street tires.  I 
have a chance at 7" cop wheels close to me and priced at $30 for the pair. I 
think I will go ahead and buy them so I can mock them up and get actual 
clearance measurements. I am sure at that price, I could probably swap meet 
them and make a couple bucks. Any more input is welcome and if someone has 
one or two of the 8" wheels, let me know. I have possibly found one. Thanks 
all.........................MO
{Steve Mick}
http://www.1962to1965mopar.ornocar.com/mick64.html

----- Original Message ----- 
From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, March 23, 2010 1:28 AM
Subject: wheels wanted


> I need a pair of 4 1/2" circle Mopar steel wheels 15x 8 with backspace 
> right at the center ( about 4 1/2 inch from the inner rim edge.) I have 
> been told that an earlier Dodge Ramcharger had these as OEM wheels  Anyone 
> know if that is right or have some wheels to sell? 
> Thanks...............................MO
>
>
> {Steve Mick}
> http://www.1962to1965mopar.ornocar.com/mick64.html
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.