SV: Shifterplate

[Knud-Erik Holm <kebh@xxxxx>]

It is totally torn apart, I have finished the bodywork, everything else is
in pjeces. So it is not possible to se if it fits.

-----Oprindelig meddelelse-----
Fra: MO ( Steve Mick) [mailto:micher@xxxxxxxxxxxxxxx] 
Sendt: 21. februar 2010 23:43
Til: 1962to1965mopars@xxxxxxxxxx
Emne: Re: Shifterplate


 I obtained a aftermarket weld in hump . I mocked up the engine tranny and 
crossmember and clutch fork linkage.  I had an old Hurst mounting plate- do 
not know the number. Bolted on the B body bosses on the tailshaft, and it 
located directly under the shifter hole in the hump.  Can you try the 
adapter plate that you have?.........................................MO

----- Original Message ----- 
From: "Knud-Erik Holm" <kebh@xxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, February 21, 2010 10:04 AM
Subject: Shifterplate


>
> Hi,
>
> I need a little help, please.
> I have welded a b-body speed hump in my 62 sport fury for the 4-speed. 
> With
> the long tailshaft that has the B and E-body shifter plate location. I 
> have
> purchase a Hurst shifter plate number 2298. will it fit the b-body 
> location?
> I have tried to find info, but seems to get confused.
>
> Thanks,
>
> Knud-erik Bergstein Holm
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect

> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>
>
> 


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.